Attività

The evolution of plasma cutting

Plasma cutting has come a long way since it was first developed in the late 1950s by engineers at Union Carbide Corp. Today it is one of the most widely used metal plate cutting processes for a large variety of industries.

Early plasma cutting systems were used primarily for cutting stainless steel and aluminum plate from 0.5 to more than 6 in. thick. These systems, primitive by today’s design standards, were the most practical method for cutting heavy nonferrous plate. Most were mounted on XY cutting pantograph-style machines that used either photo-cell tracers to duplicate large black line engineering drawings of the parts to be cut, or a magnetic tracer to follow the path of a steel template.

Engineers continuously worked on the process throughout the 1960s with the goal of improving cut quality and the life of the consumable nozzles and electrodes in the cutting torch. Plasma began gaining momentum during this period as the process improved and as users became aware of its ability to cut complex shapes in nonferrous materials at very high speeds.

In 1968 radial water injection was introduced. This patented nozzle technology used pure water injected radially around the plasma jet to constrict the arc, increasing its energy density while improving nozzle cooling and thus allowing faster cut speeds, higher-quality cuts, and the ability to cut carbon steels at speeds four to six times faster than an oxyfuel cutting process.

At about that same time, XY coordinate drive cutting machine technology was being improved. Microprocessor control technology started to become the brains of the XY motion control machines, allowing for better accuracy, higher cutting speeds (necessary for the new-technology plasma systems), and higher levels of automation and productivity on the shop floor.

Through the 1970s plasma cutting technology replaced many oxyfuel-based steel cutting applications from 0.25 to 1 in. thick, while still maintaining its stronghold on the stainless and aluminum markets. While plasma could cut steel thicker than 1 in., the oxyfuel process still was a lower-cost alternative for heavier steel plate.

Timeline of Major Engineering Breakthroughs

With the baseline of plasma’s early history established, let’s take a look at some of the major engineering breakthroughs with this technology:

1957 The plasma cutting process was developed and patented by Union Carbide as an extension of the gas tungsten arc welding (GTAW) process.

1962-1967 Several new developments were completed in consumable design, and the dual flow torch was designed to help improve consumable life and cut quality on nonferrous materials.

1968 The water injection process was commercialized. This process allowed for cutting with clean, square-cut edges and faster speeds, as well as cutting of carbon steels with acceptable cut quality.

1970-1979 The water table and water muffler, designed to provide fume and smoke control, debuted. Automated arc voltage-based height controls for more consistent cut quality and longer consumable parts life emerged.

1980-1984 Oxygen-based plasma cutting systems that helped improve edge squareness and edge metallurgy (softer, weldable edge) and allowed for cutting carbon steels at lower power levels and higher cut speeds (see Figure 2) were introduced.

1984-1990 Many developments in the air plasma cutting process allowed for better portability and lower power levels for hand cutting and mechanized thin-sheet cutting.

1990 Better power supply designs using pulse width-modulated, current-controlled outputs were developed. Some systems started to use lighter-weight, smaller inverter technology power supplies suitable for portable, hand-held plasma systems.

1992 Long-life oxygen process technology was introduced. This was essentially a microprocessor-controlled method of controlling plasma gas ramping pressures as well as power supply output amperage. It helped increase typical oxygen plasma consumable parts life by four to six times; improved parts consistency; and helped lower the cost of plasma cutting.

1993 High-definition plasma, a technique that required the previous long-life oxygen technology to implement, was developed. This process allowed for a new nozzle design that increased the energy density of an oxygen plasma arc by as much as four times, allowing for squarer, cleaner cuts in all material thicknesses.

1996 Automated gas flow control systems emerged. They interfaced digitally with the machines’ CNCs. These gas flow controls eliminated some of the potential for machine operator-related errors in setting parameters for the cutting process.

1996-2006 Many developments occurred relating to improving cut quality and productivity and automating the many process cut parameters. These included integrated plasma, a system that closely coupled the CNC, the plasma power supply, the gas flow control, the CAM software, and the height control system to automate the process. With this expertise built into the system, the machine operator’s job became much simpler, and the process relied less on operator expertise.

Recent Technology Developments

In the last seven years, developments in plasma cutting technology have come at a fast pace. The latest revision on high-definition machines is their full integration with the CNC machines they are coupled with. New CNCs have touchscreen accessibility, minimizing the number of buttons involved in operating a plasma cutting machine and making operation as simple as almost any Windows?-based software. Operator training has been simplified on even the largest, most complex CNC plasma cutting machines.